COLOR PRINTING IN THE NINETEENTH
CENTURY
LITHOGRAPHY
Lithography was the first fundamentally new printing technology
since the invention of relief printing in the fifteenth century.
It is a mechanical planographic process in which the printing and
non-printing areas of the plate are all at the same level, as opposed
to intaglio and relief processes in which the design is cut into
the printing block. Lithography is based on the chemical repellence
of oil and water. Designs are drawn or painted with greasy ink or
crayons on specially prepared limestone. The stone is moistened with
water, which the stone accepts in areas not covered by the crayon.
An oily ink, applied with a roller, adheres only to the drawing and
is repelled by the wet parts of the stone. The print is then made
by pressing paper against the inked drawing.
Lithography was invented by Alois Senefelder in Germany in 1798
and, within twenty years, appeared in England and the United States.
Almost immediately, attempts were made to print pictures in color.
Multiple stones were used, one for each color, and the print went
through the press as many times as there were stones. The problem
for the printers was keeping the image in register, making sure that
the print would be lined up exactly each time it went through the
press so that each color would be in the correct position and the
overlaying colors would merge correctly.
Early colored lithographs used one or two colors to tint the entire
plate and create a watercolor-like tone to the image. This atmospheric
effect was primarily used for landscape or topographical illustrations.
For more detailed coloration, artists continued to rely on handcoloring
over the lithograph. Once tinted lithographs were well established,
it was only a small step to extend the range of color by the use
of multiple tint blocks printed in succession. Generally, these early
chromolithographs were simple prints with flat areas of color, printed
side-by-side.
Increasingly ornate designs and dozens of bright, often gaudy, colors
characterized chomolithography in the second half of the nineteenth
century. Overprinting and the use of silver and gold inks widened
the range of color and design. Still a relatively expensive process,
chromolithography was used for large-scale folio works and illuminated
gift books which often attempted to reproduce the handwork of manuscripts
of the Middle Ages. The steam-driven printing press and the wider
availability of inexpensive paper stock lowered production costs
and made chromolithography more affordable. By the 1880s, the process
was widely used for magazines and advertising. At the same time,
however, photographic processes were being developed that would replace
lithography by the beginning of the twentieth century.
From the University of Delaware Library http://www.lib.udel.edu/ud/spec/exhibits/color/lithogr.htm
|